Guangdong South HongMing (HK) Electronic Science & Technology Co Ltd
Average Response Time
Within 24 hours
Please enter a valid keyword with 2 or more characters / numbers.
Disclaimer
Some links on this website may take you to other third-party sites and you acknowledge and agree that HKTDC and the HKTDC Affiliates have no responsibility for the accuracy or availability of any information provided by those linked websites.
Links to other websites do not constitute an endorsement by HKTDC of such websites or the Information, products, advertising, or other materials available on those websites.
Metal Film Capacitor
Production Lead Time:
7 day(s)
Model No.:
CL21 472J 250V
Colour:
Brown
Port:
Hong Kong
Minimum Order Quantity:
1,000
Description
Contact Supplier
Description
STANDARD ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS
- AMBIENT TEMPERATURE : 15oC to 35oC(If there is any doubt on the results, the measurements shall be made at +20 +/- 5oC.)
- RELATIVE HUMIDITY (R.H.) : 45% to 75% (If there is any doubt on the results, the measurements shall be made at 60% to 70%.)
- AIR PRESSURE : 86 kpa to 106 kpa.
- OPERATING TEMPERATURE RANGE : -40oC to +105oC for which the capacitor can be operated continuously at rated voltage.
- Withstand Voltage (TV) : Between Terminals, Apply 150% of rated voltage for 60 sec., or 175% of rated voltage for 1~5 sec. at +20 +/- 5oC.The charging current must be <= 1 Amp. Between Terminals & Enclosure, Apply 200% of rated voltage for 2 to 5 sec.
- Insulation Resistance (I.R.) : >= 7,500 MOhm (C <= 0.33 uF), >= 2,500 MOhm*uF/C (C > 0.33 uF) Apply Vt +/- 15% for 60 +/- 5 sec. at +20 +/- 5oC. Vt = 50 VDC if rated voltage <= 100 VDC; Vt = 100 VDC if 100 VDC < rated voltage <= 500 VDC; Vt = 500 VDC if rated voltage > 500 VDC.
- Capacitance (CAP) : Within the tolerance specified. (at +20 +/- 5oC).
- Measuring Frequency : 1 KHz +/- 10%.Measuring Voltage : <= 1 Vrms.max.
- Dissipation Factor (DF) : <= 0.010 (1.0%) at 1 KHz. Measuring Frequency : 1KHz+/- 10% Measuring Voltage : <= 1 Vrms.max.
- Connection of Element : Shall be no open nor short-circuiting. The connection shall be stable. DF shall be <= 0.010 (1.0%) at 1 KHz. Apply 200% of rated voltage for 10 times.
- Solderability : More than 90% of circumferential surface of lead wire shall be covered with new solder.
- Testing method per IEC 68-2-20 Ta. Soldering temperature : +260 +/- 5oC.
- Immersion duration : 2 +/- 0.5 secs
Average Response Time
Within 24 hours
You may also like
Average Response Time
Within 24 hours
Supplier info last updated: 4 Jan 2021
Advertise since: 1 Aug 2008
Unfollow the following supplier?