Shenzhen JDB Technology Co., Ltd.
Please enter a valid keyword with 2 or more characters / numbers.
Disclaimer
Some links on this website may take you to other third-party sites and you acknowledge and agree that HKTDC and the HKTDC Affiliates have no responsibility for the accuracy or availability of any information provided by those linked websites.
Links to other websites do not constitute an endorsement by HKTDC of such websites or the Information, products, advertising, or other materials available on those websites.
PCB Prototype Double Layer PCB Fabrication
Brand:
PCBGOGO
Colour:
GREEN
Port:
Shenzhen
Type of Payment:
T/T, PayPal
Minimum Order Quantity:
5 piece(s)
Package:
Yes
Customised:
Yes
Board Thickness:
0.4mm-2.4mm
Min. Line Spacing:
0.1mm
Min. Line Width:
0.1mm
Base Material:
fr-4
Copper Thickness:
1~3oz
Min. Hole Size:
0.1mm
Surface Finishing:
HASL WITH LEAD /HASL Lead free/enig
Through Hole Type:
Pin Tthrough Hole PCB
Description
Contact Supplier
Description
- PCBGOGO PCB Board Fabrication Capabilities
- Items Fabrication Capabilities Remarks Picture
- Layer Count 1-10 layers 1-10 Layers PCB fabrication will be provided online order by PCBGOGO. If your PCB order is over 10layers, please contact your customer service for quotation.
- Material FR-4 94V0/ Aluminum For FPC, HDI, ROGERS, HAlOGEN-FREE, HIGH TG ETC., contact your customer service.
- Maximum
- PCB Size 500x1100mm The max. size of PCBGOGO PCB is 50*40cm. and we accept longer PCB board which max. length is 1100MM
- Minimum
- PCB Size 3mm*3mm
- Maximum
- Panel Size 50cm*45cm
- Minimum
- Panel Size 7.5*7.5CM If you need v-cut, this is minimum panel size in PCBGOGO
- Tolerance
- size of
- board
- (outline) ±0.2mm CNC tolerance is ±0.2mm, v-cut tolerance is ±0.5mm
- Board
- Thickness 0.4-2.4mm The thickness we could fabricate is 0.4/0.6/0.8/1.0/1.2/1.6/2.0/2.4
- Tolerance
- thickness of
- board
- ( t≥1.0mm) ±10% Pay attention: as the capability (PTH, solder mask and others) will add the board thickness, we usually use Plus Tolerance.
- Tolerance
- thickness of
- board
- ( t≥1.0mm) ±0.1mm Pay attention: as the capability (PTH, solder mask and others) will add the board thickness, we usually use Plus Tolerance.
- Min. Line
- Width 4mil(0.1mm) Min. Line Width is 0.1mm；In terms of multi-layer PCBs, Min. Line Width for inner-layer is 0.175mm, and
- 0.1mm/4mil for outer layer. if the minimum line width is less than 6mil , there will be an extra charge / fee.
- Min. Line
- Space 4mil(0.1mm) Min. Line Spacing is 0.15mm/6mil. If Min. Line Spacing is less than 6mil, it will charge extra fee.
- Outer Layer
- Copper
- Thickness 35um/70um/105um （1OZ/2OZ/3OZ） It means the thickness of copper in outer layer. 1 OZ＝35um, 2OZ=70um, 3OZ=105um.
- Inner Layer
- Copper
- Thickness 35um/50um(1OZ/1.5OZ) Default is 1OZ, but if you have special requirement, 1.5 OZ is acceptable./td>
- Drill
- Diameter
- Range 0.2-6.3mm Min. Size of drill via CNC is 0.2mm. 6.3mm is maximum size.
- Annular
- Ring ≥0.1mm（4mil） If Annular Ring is smaller but there is enough space, there is no limit for the Annular Ring size. But if there is not enough space coupled with dense lines, the Annular Ring size should be over 0.1mm.
- Finished
- Hole Size 0.2--6.20mm Because the copper will cover the surface of hole, the Finished hole size is smaller than it is in Gerber file.
You may also like
Shenzhen JDB Technology Co., Ltd.
Mainland China
Average Response Time
N/A
Supplier info last updated: 2 Aug 2020
Advertise since: 1 Aug 2017
Unfollow the following supplier?