Gold Fame Int'l Enterprises Co
Please enter a valid keyword with 2 or more characters / numbers.
Disclaimer
Some links on this website may take you to other third-party sites and you acknowledge and agree that HKTDC and the HKTDC Affiliates have no responsibility for the accuracy or availability of any information provided by those linked websites.
Links to other websites do not constitute an endorsement by HKTDC of such websites or the Information, products, advertising, or other materials available on those websites.
PCBs
Port:
Hong Kong
Description
Contact Supplier
Description
We provide quality multilayer PCBs fulfilling ISO9001 SGS system certification standard and UKAS quality management, achieving the PCB with technical data highlighted below:
- Technology: FR4 CEM-1 CEM-3 : Ni/Au, hot air leveling.
- More than double-layer: HAL equal electroplating or chemical nickel/gold, hot air leveling (spray-tin), Gold-finger plating, desmear.
- The production capacity (double to 10 layers): two-layer 10,000 to 15,000 square meter per month to more than four layers 6,000 to 8,000 square meter per month.
- Single-layer: 3 days.
- Double-layer: 5 to 7 days.
- Four layers: 7 to 8 days.
- More than six-layer: 10 days.
- Quality policy: the pursuit of good-quality, zero-defect goal and providing satisfactory service.
- Layers: 1 to 10 layers.
- Maximum board size: 450 x 600cm 18 x 24 inch.
- 4-layer 0.60mm 24mil.
- 6-layer 1.00mm 40mil.
- 8-layer 1.20mm 48mil.
- 10-layer 1.50mm 60mil.
- Minimum line width: 0.10mm 4mil.
- Minimum space: 0.10mm 4mil.
- Minimum hole size: 0.30mm 12mil.
- PTH wall thickness: 18um.
- PTH hole diameter tolerance: +/-0.10mm 4mil.
- Non PTH hole dia. tolerance: +/-0.05mm 2mil.
- Hole position deviation: +/-0.05mm 2mil.
- Out line tolerance: +/-0.15mm 6mil.
- Minimum S/M bridge: +/-0.1mm 4mil.
- Twist and bent: less or equal to 1.0%.
- Insulation resistance: normal 1m Ohm.
- Through hole resistance: less than 300 Ohms normal.
- Electric strength: greater than 1.3KV per mm.
- Current breakdown: 10A.
- Peel strength: 1.4N per mm.
- Solder mask abrasion: greater than 4H.
- Flammability: 94V-0.
- Test voltage: 50 to 300V.
You may also like
Average Response Time
N/A
Supplier info last updated: 8 Oct 2016
Advertise since: 1 Oct 2010
Unfollow the following supplier?