參展商

Increase your productivity 
While the operator loads material on one side, the cutter continues operating on the other. This setup increases efficiency, keeps idle time to a minimum, and maximizes throughput. In a tandem setup, the working area consists of two vacuum plates that can be switched on and off independently of one another. Each side of the working area is equipped with controls for switching the vacuum on/off and for resuming production. Once the material is loaded, the vacuum can be re-activated on that side of the cutter. Once the material is properly loaded, the operator pushes the release button so processing can continue. 
 
All benefits at a glance

<ul>
	<li>Saves time, increases productivity&nbsp;</li>
	<li>Reduces idle time to a minimum</li>
	<li>Simple, ergonomic operation</li>
	<li>The vacuum width is adjustable on both sides across the entire working area</li>
	<li>Available for cutter sizes: M-2500, L-2500, L-3200, XL-3200, 2XL-3200, 3XL-2500, 3XL-3200</li>
</ul>

Roll-off unit cradle feeder 
The cradle feeder enables tension-free feeding of flexible textiles. At the center of this material-feeding system is a cradle consisting of rollers and conveyor belts that advance the material onto the working area of the cutter. A dancer bar continually registers fluctuations in the web tension. If needed, the enclosed unwinder regulates the drive speed and guarantees an absolutely tension-free material feed. The web edge control regulates the precise alignment of the material edge. If the sensor detects an irregularity, the cradle feeder automatically adjusts the horizontal alignment of the cradle. Because the roll is not on a shaft, there are no special requirements for the roll core. Even rolls with a kinked, broken, or missing core can be easily fed. The fast rewind function ensures the material is rewound tightly after processing.
<ul>
	<li>Tension-free feeding of flexible, stretchable textiles</li>
	<li>Automatic web edge control guarantees feed accuracy</li>
	<li>Fast, easy roll changes for maximum flexibility</li>
	<li>Handles rolls with kinked, broken, or missing core</li>
	<li>Fast rewind function returns the material to the starting position after processing</li>
	<li>Simple controls with the user-friendly touch panel</li>
	<li>An additional roll-off unit with shaft can be mounted on the cradle feeder as an option</li>
	<li>Fully supported in Zünd Cut Center - ZCC</li>
</ul>
 
Details

<ul>
	<li>Roll weight: max. 100 kg/220 lbs</li>
	<li>Roll diameter: max. 400 mm/15.75 in</li>
	<li>Available in L, XL, and 3XL widths</li>
	<li>Can be mounted either directly on the cutter or on the cutter extension</li>
	<li>Suitable for inward/outward wound rolls</li>
	<li>Compatible with G3, S3, D3</li>
</ul>

Sheet Feeder 
Highly productive and reliable material feeding - convert your Zünd cutter into an automated production machine! Printed vinyl, film, and dense cardboard materials are transported from the loading table onto the cutting surface using suction cups. After processing, cut parts and waste are collected an off-load table. With this automated production workflow, you can easily handle even longer production runs. 
 
All benefits at a glance 
Superior productivity 
Suitable for high-volume production 
Reliable material transport 
Off-load table for collecting cut parts and/or waste 
 
Details 
Max. sheet size: 
M-800: 830 x 1330 mm/32 x 52 in 
M-1200: 1230 x 1330 mm/48 x 52 in 
M-1600: 1630 x 1330 mm/64 x 52 in 
L-1200: 1230 x 1800 mm 
L-1600: 1630 x 1800 mm 
Stack height up to 200 mm/7.5 in 
Max. thickness 5 mm / 3/16 in 
Compatible with S3 M-line

The robust design of the Zünd Center Winder enables processing rolls up to a weight of 100 kg/220 lbs. The well-designed mechanics ensure consistent material tension. Even challenging textile materials can be fed onto the cutting system free of wrinkles and tension. The driven center winder can both unwind and rewind rolled materials. For lighter rolls weighing up to 40 kg/90 lbs, the dancer bar can be used as a passive roll-off unit. 
All benefits at a glance

<ul>
	<li>Wrinkle-free roll-off/rewind</li>
	<li>Motor-driven system for wide, heavy rolls</li>
	<li>Dancer system for consistent material tension</li>
	<li>Pneumatic shaft grips and stabilizes the core</li>
	<li>Alternative use as passive roll-off for lighter rolls</li>
	<li>Suitable for inward/outward wound rolls</li>
</ul>
Details

<ul>
	<li>Max. roll diameter: 350 mm/13.5 in</li>
	<li>Max. roll weight: 100 kg/220 lbs</li>
	<li>Roll core diameter: 76 mm/3 in</li>
	<li>Available for cutter sizes</li>
</ul>

<ul>
	<li>Digital cutting at an industrial level</li>
	<li>The unique combination of fully automatic material handling and high-performance digital cutting is the key to industrial-level production. The BHS150 extends operating time while decreasing operating costs.</li>
	<li>Efficient stacking with the BHS150</li>
	<li>The 1.5 m/5 ft stack height allows for significantly longer uninterrupted operating time. As a result, even long runs can be finished efficiently and economically. Finished stacks can be removed without interrupting production.</li>
	<li>Top production speed to meet the highest demands</li>
	<li>The BHS150 is designed for operation with Zünd G3 and D3 series cutters. With its dual-beam technology, the D3 provides a significant increase in performance and thus offers maximum productivity.</li>
	<li>Capture job data automatically</li>
	<li>During the loading process, a scanner captures job information via printed QR codes. This enables reliably identifying different jobs within a stack for fully automated processing.</li>
	<li>Ideal for different material thicknesses</li>
	<li>The BHS150 can efficiently process materials up to 110 mm/4.3 in thick.</li>
	<li>Bridge-free stacking</li>
	<li>The off-load conveyor and stacking system deposits cut sheets in a perfect stack on a pallet. Depending on the job, this stacking method eliminates the need for bridges to hold cut parts in place. This facilitates separating cut parts from waste, saving both time and money.</li>
	<li>Economical even with smaller formats</li>
	<li>The loading unit can feed multiple sheets at once. Even smaller sheet or board sizes can be processed efficiently by making full use of the working area.</li>
</ul>

Two beams for twice the throughput 
The D3 has two beams that operate independently. Depending on the job, this can double your productivity. The intelligent cutter controller allocates the work optimally to each of the two beams. 
A flexible choice of tools 
You have the flexibility to choose precisely the tools you need for the job at hand. Combine the required tools based on your specific requirements. You can equip the D3 with up to three different tools per beam. 
Integrated Tool initialization 
The setup of of knife-cutting, routing, and creasing tools occurs fully automatically. The ITI Initialization System makes the process quick and precise.&nbsp; 
Ergonomics and operation 
Configure the D3 according to your specific needs, with cutter extensions and/or material-handling solutions. Just like the cutter, all these options were designed with an eye towards ergonomics. The cutter is easily accessible from all sides, which ensures an efficient production workflow. 
Two beams, twice the performance 
With its innovative dual-beam system, the D3 sets new standards in performance. The two beams can each be equipped with up to three different modules, instantly doubling the throughput. The cutter controller optimally allocates the jobs to each of the two beams, ensuring maximum productivity. 
The new standard in productivity 
With its dual-beam system, the Zünd D3 delivers the ultimate in productivity. Because of its powerful, rugged design, the D3 lives up to its true potential in industrial environments. 
Precision at the highest level 
The D3 Cutter is a precision machine. From innovative drive system to blade, all components are perfectly coordinated. Produce your jobs at the highest quality level, economically and efficiently. Your customers will be thrilled with the results. 
Modular design for maximum flexibility 
The extraordinary modularity of our cutting solutions is truly unique. You can always make your D3 cutting system adapt to new requirements with modifications and upgrades. Zünd cutters are a safe investment and offer maximum value retention. Zünd's modular design concept lets you put together a tailor-made cutting solution configured to meet specific production needs. 
Unsurpassed price-performance ratio 
The price-performance ratio of the D3 cutter series is excellent. We use only the most modern technologies and highest-quality components. The flexibility, reliability, and quality of the D3 cutter cannot be matched by any competitor. 
 
 
&nbsp;

<ul>
	<li>Optimize your productivity</li>
	<li>Process leather, sole, lining, and stencil materials precisely and efficiently with the L3 cutting system. With the right tool, you can cut leather at a speed of up to one meter/40 in per second. With an L3 you can produce leather goods economically, efficiently, and of premium quality.</li>
	<li>Efficient and economical</li>
	<li>Couches and sectionals, office chairs, car seats, leather steering wheels - Zünd cutting technology is at the origin of so many products we encounter on a daily basis. Many well-known manufacturers in the leather industry rely on Zünd cutting systems. This is not surprising considering the outstanding performance, low cost of ownership, and easy integration into your workflow ensuring a rapid ROI.</li>
	<li>A tailor-made cutting system</li>
	<li>Zünd cutting systems are used both in prototyping and production. We can offer you the right solution for your production environment, tailored to your individual needs. With 17 cutter sizes, a large variety of tools, and a range of sophisticated material-handling solutions, we can guarantee a perfect fit.</li>
	<li>Cutting non-stop</li>
	<li>The L3 cutter is designed for non-stop operation with loading/unloading and cutting all taking place at the same time. A green LED strip indicates in which area production has ended and new material can be loaded.</li>
	<li>Projection systems</li>
	<li>Projection systems support the operator throughout the process - from capturing the leather to nesting and removing the cut parts.</li>
	<li>Optimal material hold-down</li>
	<li>Energy-efficient vacuum turbines ensure reliable material hold-down during the cutting process. The vacuum area is divided into zones, which can be switched on and off individually across the width of the machine.</li>
	<li>A flexible choice of tools</li>
	<li>You have the flexibility to choose precisely the tools you need for the job at hand. Combine the required tools based on your specific requirements. You can equip the L3 with up to seven different tools.&nbsp;</li>
	<li>Cutting non-stop</li>
	<li>Loading/unloading and cutting can all take place at the same time. A green LED strip clearly indicates at any time which area is safe to access.</li>
	<li>Ergonomic operation</li>
	<li>The L3 working surface is slanted, which facilitates the loading/unloading process. For optimal accessibility, the control panel is mounted on a guide rail and can be freely moved.</li>
</ul>