参展商

<img src="https://sourcing-media.hktdc.com/product-original/elderly-20care-20product/76898127e1ee41e589be26502ae85ec7" style="width: 909px;" class="fr-fic fr-dib" data-productmediaid="76898127e1ee41e589be26502ae85ec7">#elderly care product

Item: TS0893 Desc: Nursecall Voice Alert Features: - Bed, wheelchair or entrance alarm with voice function. - Choice of High / Low volume or silence mode with flashing light. - Record your own alert message or instructions in a voice that is familiar to the patient. - Alert activated by the magnetic switch with cord and clip or optional sensor pads via the RJ9 socket. - Dual use with sensor pad option to alarm when the pad is either stepped on or off. - Enables caregivers to receive a remote alarm signal if connected to an existing Nursecall system via the 6.3mm mono jack. - Tamper Resistant Suspend Mode will stop monitoring temporarily to facilitate patient repositioning without triggering an alarm. - Battery low indicator to ensure uninterrupted patient monitoring. - Versatile clip and mounting bracket included.

<ul>
	<li>The purpose of this Anti-Tamper Care Alarms is to alert caregivers to patients who are at risk of falling.</li>
	<li>When the patient rises, either detaching the Magnetic Pull-Cord or get up off the Sensor Pad, the alarm sounds.</li>
	<li>The device can be turned off only either by an Infrared (IR) Remote Control or by a Reset Key.</li>
	<li>This eliminates the risk of the alarm being turned off by the person under care without being attended to by the caregiver.</li>
	<li>Features:</li>
	<li>Versions for pull cord operation or with optional sensor pads</li>
	<li>Alarms when someone gets up out of a bed, wheelchair or chair without being attended to by the caregiver</li>
	<li>Loud or soft volume settings with battery check light</li>
	<li>Versatile mounting base and hanger included</li>
	<li>Tamper free reset and suspend by infrared remote control Nursecall versions will connect to other systems for remote alarm signalling</li>
	<li>Suspend mode allows for patient repositioning with adjustable stand-by time</li>
	<li>Reset mode puts the alarm into stand-by until re-activated by next use</li>
	<li>Cable holder to prevent accidental disconnection</li>
	<li>Two alarm sounds</li>
	<li>Silent mode for use with remote alarm signalling Nursecall systems</li>
	<li>4 digits ID code to match remote control to alarm and eliminate interference</li>
	<li>Rubberised housing for protection against damage caused by dropping on hard floors</li>
	<li>Easy Cleaning of Pull Cord</li>
	<li>Uses 4 x AA batteries (not included) or optional mains adapter</li>
</ul>

<ul>
	<li>Chair / Bed Sensor Pad</li>
	<li>Foldable Air Ventilation Pipe</li>
</ul>

This pressure sensor mat for patient monitor is durable and easy to clean.&nbsp; Alarm may be switched to alert when pressure is applied or relieved, giving each mat a dual use. 
 
The sensor mats come with a modular plug that can work with most alarm system that has this function, like our Model TS0894 - Voice Alert or TS1011A - Anti-Tamper Dual Alarm.

<div>The anti-tamper car alarm is equipped with a rubberized housing for protection against damage caused by dropping onto hard floors. The compact design allows efficient use of space. The "suspend" mode allows patient repositioning with adjustable stand-by time.</div>

<ul>
	<li>Versions for sensor pads only.</li>
	<li>Tamper-free resetting and suspension by infrared remote control.</li>
	<li>Nurse-call versions will connect to other systems for remote alarm signaling.</li>
	<li>"Reset" mode puts the alarm into stand-by situation until re-activation by next use.</li>
	<li>2 alarm sounds and low or high volume settings.</li>
	<li>"Silent" mode for use with remote alarm signaling nurse-call systems.</li>
	<li>4-digit ID code to match remote control to alarm and eliminate interference.</li>
	<li>Easy cleaning of pull cord.</li>
	<li>Versatile mounting bass and hanger included.</li>
</ul>

Features: 
- Bed, wheelchair or entrance alarm with voice function. 
- Choice of High / Low volume or silence mode with flashing light. 
- Record your own alert message or instructions in a voice that is familiar to 
&nbsp;&nbsp; the patient. 
- Alert activated by the magnetic switch with cord and clip or optional sensor&nbsp; 
&nbsp;&nbsp; pads via the RJ9 socket. 
- Dual use with sensor pad option to alarm when the pad is either stepped on 
&nbsp;&nbsp; or off. 
- Enables caregivers to receive a remote alarm signal if connected to an 
&nbsp; existing Nursecall system via the 6.3mm mono jack. 
- Tamper Resistant Suspend Mode will stop monitoring temporarily to facilitate 
&nbsp;&nbsp; patient repositioning without triggering an alarm. 
- Battery low indicator to ensure uninterrupted patient monitoring. 
- Versatile clip and mounting bracket included. &nbsp; 
&nbsp;

<ul>
	<li>In case of elderly/patient who tries getting out of wheel chair/bed lifting-off from the sensor mat without any assistance, voice alert or anti-tamper care alarm will be triggered the sound and/or given a familiar voice instruction directly to the elderly/patient, reminding them to stay in&nbsp;its position and minimizing the risk of falling.</li>
</ul>

The Anti-Tamper alarm is a helpful assistant for caregiver. &nbsp;The latest alarm technology can only be turned off by either infrared (IR) remote control or a Reset Key. &nbsp;This eliminates the risk of the alarm being turned off by the person under care without being attended to by the caregiver. &nbsp;It works as a local alarm or can connect into a multi point Nursecall system with a suitable connecting cable. &nbsp;There are two alarm sounds, with adjustable volume and a silent mode for use with Nursecall systems that operate on remote alarm signaling. &nbsp;It can be wall mounted or fitted to beds, chairs or wheelchairs with the two different size mounting hooks included. &nbsp;The system uses a 4 digit ID code to match each remote control tot he monitor and eliminates interference from other systems.&nbsp; Low battery indicator is incorporated.

Featured here is an anti-tamper dual alarm that can be reset and suspended by infrared remote control. The rubberized housing offers protection against damage caused by dropping onto hard floors. A versatile mounting base and hanger are included for convenient attachment. 
<ul>
 <li>Versions for pull cord operation or with optional sensor pads.</li>
 <li>Nurse-call versions will connect to other systems for remote alarm signaling.</li>
 <li>"Suspend" mode allows patient repositioning with adjustable stand-by time.</li>
 <li>"Reset" mode puts the alarm into stand-by situation until re-activation by next use.</li>
 <li>2 alarm sounds and low or high volume settings.</li>
 <li>"Silent" mode for use with remote alarm signaling nurse-call systems.</li>
 <li>4-digit ID code to match remote control to alarm and eliminate interference.</li>
 <li>Easy cleaning of pull cord.</li>
</ul>

The anti-tamper care alarm allows&nbsp;tampering free resetting and suspension by the infrared remote control. The nurse call versions will connect to other systems for remote alarm (included) signaling. The suspending mode allows patient repositioning with the adjustable standby time.
<ul>
	<li>Approval: medical device Class 1.</li>
	<li>Versions for magnetic pull cord operation or with optional sensor mats.</li>
	<li>Resetting mode puts the alarm into standby until reactivated by next use.</li>
	<li>2 alarm sounds &amp; low or high volume settings.</li>
	<li>Silent mode for use with remote alarm signaling nurse call systems.</li>
	<li>4 digit ID code to match remote control to alarm and elimination interference.</li>
	<li>Rubberized housing for protection against damage caused by dropping on hard floors.</li>
	<li>Versatile mounting base and hanger are included.</li>
	<li>Easy cleaning of the pull cord.</li>
	<li>Uses 4 x AA batteries (not included) or optional mains adaptor.</li>
</ul>

The voice alert offers a choice of the high volume, low volume or silence mode with flashing light. It allows you to record your own alert messages or instructions with a voice that is familiar to the patient. This piece also enables a caregiver to receive a remote alarm signal if it is connected to an existing nurse call system via a 6.3mm mono jack.
<ul>
 <li>Bed, wheelchair or entrance alarm with voice function.</li>
 <li>The alert is activated by the magnetic switch with cord and clip or optional sensor pads via the RJ9 socket.</li>
 <li>Dual use with sensor pad option to alarm when the pad is either stepped on or off.</li>
 <li>Tampering resistant suspending mode: stop monitoring temporarily to facilitate patient repositioning without triggering an alarm.</li>
 <li>Battery low indicator to ensure uninterrupted patient monitoring.</li>
 <li>Versatile clip and mounting bracket are included.</li>
</ul>

The pressure sensor mat for the patient monitor is durable and easy to clean. The alarm will be triggered when the patient attempts to get up. The sensor mat comes with a modular plug that can work with most alarm systems that have this function, like our model TS0893 Voice Alert or TS1011A Anti-Tamper Alarm.
<ul>
	<li>Versatile: comes in different sizes for different applications.</li>
	<li>Easy to clean and sanitize.</li>
	<li>Fitted with international standard modular plug that suits most alarm systems.</li>
	<li>Instruction and usage log printed on the mat for easy reference.</li>
</ul>

ISO 13485 Certified 
Medical Device Class IIa Approved CE0123 
 
The featured therapy light helps fight seasonal affective disorder (SAD) and combats the effect of jet lag and winter blues. It improves physical and mental well-being during short winter days. 
 
Features:
<ul>
	<li>Simulates Natural Daylight.</li>
	<li>Improves Physical &amp; Mental Wellbeing during Dark, Short Winter Days.</li>
	<li>Uses mini CCFT (Cold Cathode Fluorescent Tube) lamps.</li>
	<li>Selects light intensity by sliding the Light Control Switch.</li>
	<li>Helps the treatment of Seasonal Affective Disorder (SAD)</li>
	<li>Combats the effect of Jet Lag.</li>
	<li>Compact, Light and Portable.</li>
	<li>Uses no LED’s which can create “SPOTTING” in the eye’s.</li>
	<li>12W Output and 2500 Lux at close up Full Power.</li>
	<li>Mains operated from 12v adapter supplied.</li>
	<li>Switchable power supply from 110v to 220v</li>
</ul>

This is a voice alert that is made with a robust housing for enhanced durability. It is well engineered to deliver reliable and stable performance. This voice alert is easy to operate and maintain.
<ul>
	<li>Alert first with a pre-recorded message of up to 20 seconds to give direct instruction to the patient will help to minimize accident.</li>
	<li>Pre-recorded message from a person known to the patient provides a friendly and familiar atmosphere.</li>
	<li>Flashing red light direct care-giver to the patient.</li>
	<li>Choice of 4 different alarm tones.</li>
	<li>Choice of 2 alarm loudness levels.</li>
	<li>Restraint-free: the magnetic pull switch (standard issue) release from any direction.</li>
	<li>Convenient on/off switch for easy de-activation.</li>
	<li>Supplied with mounting holster and belt strap for easy mounting.</li>
	<li>Can also be used with optional pressure sensor pads, door banner or other sensor equipment via the connection jack.</li>
</ul>

Features: 
- Simulates Natural Daylight. 
- Improves Physical &amp; Mental Wellbeing during Dark, Short Winter Days. 
- Uses mini CCFT (Cold Cathode Fluorescent Tube) lamps. 
- Selects light intensity by sliding the Light Control Switch. 
- Helps the treatment of Seasonal Affective Disorder (SAD) 
- Combats the effect of Jet Lag. 
- Compact, Light and Portable. 
- Uses no LED’s which can create “SPOTTING” in the eye’s. 
- 12W Output and 10,000 Lux at close up Full Power. 
- Mains operated from 12v adapter supplied. 
- Switchable power supply from 110v to 220v 
 
&nbsp;