Plastic case Constant Current Led Transformer 60w 1200mA DMX Dimming Led Driver for Light | Lights | Lighting Accessories & Parts
Plastic case Constant Current Led Transformer 60w 1200mA DMX Dimming Led Driver for Light
Mainland China
Booth: 1B-A21 | Smart Lighting Products & Solutions |
Product Specification
Design features

DMX signal-end isolation,Driver parameters can be adjusted by NFC APP.

Others

High efficiency, small size, high power factor, low THD

Efficiency

Up to 86.5%

Protections

Open circuit/short circuit/over temperature/over load

Waterproof performance

IP20(EU); for dry and damp locations(US)

Application

Suitable for the application of LED lighting

Heat dissipation

Cooling by free air convection

Output

Constant Current

PFC design

Built-in active PFC function

Dimming function

DMX dimming, RDM dimming, flicker free

Product Description
ModelSMT-DI060W120-DMXP-T
CertificateUL/FCC/CE /ClassP/Class2/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCA
OutputRated current120mA-1200mA 
DC Voltage24V-93V
No-load voltage98Vmax
Voltage ToleranceOutput current ± 10mA for ≤ 300mA, ± 20mA for ≥ 300mA, and ± 30mA for ≥ 1000mA
Rated power60Wmax
Line Regulation<0.5%
Load Regulation<0.5%
InputVoltage Range100-277VAC
Frequency Range50/60Hz
Power Factor (Typ.) PF≥0.94
No load power (Max)<1.5W
Standby power (Max)<0.5W
THD(Typ.) @ full load≤15%
Efficiency @ full load≥88%@120VAC 60Hz    ≥89%@230VAC 50HZ     ≥89%@277VAC 60HZ
AC Current (Max.)0.75A
Inrush Current (Typ.)28.7A, 204us@50%Ipeak@120V     55.2A, 98us@50%Ipeak@230V
66.0A, 220us@50%Ipeak@2770V
Leakage current<0.5mA
ProtectionShort CircuitHiccup mode, recovers automatically after fault condition is removed
Over voltageHiccup or constant power mode, reboots automatically after fault condition is removed
Over temperatureAmbient temp. over 55 ± 5℃, output current will be reduced to 50%;
Ambient temp.Over 45 ± 5℃,recovers automatically.
Ambient temp.over 75 ± 5℃, output current will be reduced to 0%;
Ambient temp.Over 45 ± 5℃,recovers automatically.
EnvironmentWorking TEMP-40~+60℃ (see below derating curve) 
Working Humidity20 -90%RH  non-condensing 
Storage TEM.,Humidity-40 - +80℃,10 - 95% RH 
TEMP.coefficient±0.03%/℃(0 - 50℃)
Vibration10~500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y,Z axes
Safety & EMCSafety standardsEN61347-1   EN61347-2-13(EU)  &  UL8750 (US)
Withstand voltageI/P-O/P:3.75KVAC (EU)  &  I/P-O/P:1.8KVAC (US)
Strobe test standardIEEE 1789 Flicker free
lightning surgeDM:2KV  
Isolation resistanceI/P-O/P:100MΩ / 500VDC / 25℃ / 70%RH
EMC EmissionEN55015   EN61000-3-2,3(EU)  &  FCC Part15 Subpart B; ANSI C63.4:2014(US)
OthersNet Weight0.38KG
Dimension314*30*21.7mm (L*W*H)
Packing355*270*195mm   20pcs /CTN
Notes1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.
2. To extend the driver's using life, please reduce the loading at lower input voltage .
3. LED driver Meets the harmonic emissions requirements of ANSI C82.77-10.
4. Dimming electrical circuit:
Notice: This control circuit is isolated,but didn't evaluate Class 2.
Please refer to the installation manual to connect the dimmer.
CAUTlON: More than one power supply present.
ATTENTION: presence de plusieurs alimentations électriques.