277Vac Triac Dimming LED Power Supply 60W 12V 24V LED driver PWM & VR output Switchable | Lights | Lighting Accessories & Parts
    277Vac Triac Dimming LED Power Supply 60W 12V 24V LED driver PWM & VR output Switchable
    Quanzhou Smarts Electronic & Technology Co., Ltd.
    Mainland China
    Booth: 1B-A21 | Smart Lighting Products & Solutions |
    Product Specification
    Protections

    Short circuit/ over load/ over temperature

    Working Mode

    Constant Voltage

    Dimming Range

    0-100% Dimming depth 0.1%

    Warranty

    7 Years Warranty

    Range

    100-277VAC

    Brand

    SMARTS

    Model No.

    SMT-12060-VT-P

    Dimming Function

    Phase dimming: work with forward phase /leading edge, MLV and Reverse phase /trailing edge, ELV, TRIAC dimmers

    Product Description
    ModelSMT-12060-VT-PSMT-24060-VT-PSMT-48060-VT-P
    CertificateUL / cUL / FCC / Class P / Type HL / Class 2
    OutputDC Voltage12V24V48V
    Voltage Tolerance±5%±3%±2%
    Voltage Regulation≤0.5%≤0.5%≤0.5%
    Load Regulation≤2%≤1%≤1%
    Rated current5A2.5A1.25A
    Rated power60W
    Voltage Ripple500mVp-p450mVp-p450mVp-p
    Overshoot voltage<7%(full load)<5%(full load)<5%(full load)
    Output mode selectionWhen the purple wire and the pink wire at the output terminal are short-circuited, it indicates the Pulse-Width Modulation (PWM) mode. When they are disconnected, it indicates the Voltage Regulation (VR) mode of direct current voltage modulation.
    Switching the output mode requires the power to be cut off for 3 seconds and then powered on again for the mode switching to take effect.
    InputVoltage Range100-277VAC
    Frequency Range47 - 63Hz
    Power Factor (Typ.) @ full load>0.98@120VAC
    >0.97@277VAC    		>0.98@120VAC
    >0.97@277VAC    		>0.98@120VAC
    >0.97@277VAC
    THD(Typ. ) @ full load<15%@120V  <15%@277V
    Efficiency(Typ.) @ full load≥83%@120VAC
    ≥84%@277VAC    		≥83%@120VAC
    ≥85%@277VAC    		≥84%@120VAC
    ≥86%@277VAC
    AC Current (Max.)≤0.75A @120VAC  ≤0.3A@277VAC
    Standby power≤0.5W
    Inrush Current (Typ.)31.6A,152us@50%Ipeak 120VAC     76.8A,156us@50%Ipeak 277VAC
    Leakage current<0.5mA
    ProtectionShort CircuitHiccup mode, can be automatically restored after abnormal removal
    Over Load≥120%,Constant - Current Mode, automatic recovery after exception
    Over temperatureWhen the ambient temperature exceeds 55℃ ±5℃, the output is turned off
    EnvironmentWorking TEMP.-40~+40℃ (see below derating curve)
    Working Humidity20 - 95%RH  non-condensing
    Storage TEM.,Humidity-40 - +80℃,10 - 95% RH non-condensing
    TEMP.coefficient±0.03%/℃(0 - 50℃)
    Vibration10 ~ 500Hz, 5G 12 minutes/cycle, X Y Z axis 72 minutes each
    Safety & EMCSafety standardsUL8750  CAN/CSA-C22.2 No.250.13
    Withstand voltageI/P-O/P:1.88KVac;I/P-FG::1.88KVac;O/P-FG:0.5KVac
    Isolation resistanceI/P-O/P:100MΩ / 500VDC / 25℃ / 70% RH
    Surge Immunity TestAC Power Line:Differential Mode 2KV,Common Mode 4KV
    EMC ImmunityFCC/ICES do not request this test
    EMC EmissionFCC Part15 Subpart B;ANSI C63.4:2017;ICES-005 Issue 5
    OthersNet Weight0.5KG
    Dimension188*61.4*25.5mm(L*W*H)
    Packing415*230*170mm    20 pcs / CTN
    Notes1. All parameters NOT specially mentioned are measured at 120VAC input, rated load and 25℃of ambient temperature.
    2. Tolerance: includes set up tolerance and load regulation .
    3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.
    4. Default states:The output mode is PWM output by default. The dimming curve is a gamma2.2 curve.
    5. Regarding LED driver load types where the driver meets the harmonic emissions requirements of ANSI C82.77-10.


    View more about this product
    YOU MAY ALSO LIKE