Ultra-thin Constant Current 100w 1600mA Led Power Supply Ip20 0-10v Dimmable Led Driver for LED Strip | 灯饰 | 照明配件及零件
Ultra-thin Constant Current 100w 1600mA Led Power Supply Ip20 0-10v Dimmable Led Driver for LED Strip
中国内地
展位编号: 1B-A21 | 智能照明解决方案及产品 |
产品规格
Dimming range

0.3%-100%

Efficiency

Up to 81%

Waterproof performance

Full plastic protection housing, for dry & damp locations .

PFC design

Built-in active PFC function

Dimming function

0-10V dimming, 1-10V dimming, flicker free

Design features

0-10V signal-end isolation,Driver parameters can be adjusted by NFC APP.

Heat dissipation

Cooling by free air convection

Protections

Short circuit/ Over load/ Over temperature/Over voltage

Output

Constant Current

产品简介
ModelSMT-DI100W160-CDP-T
CertificateUL/FCC/CE /ClassP/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCA
OutputRated current160mA-1600mA 
DC Voltage24-93VDC
Rated power100Wmax
Current ToleranceOutput current ± 30mA
Line Regulation<0.1%
Load Regulation<0.1%
InputVoltage Range100-277VAC
Frequency Range50/60Hz
Power Factor (Typ.) >0.99@120VAC 60Hz    >0.98@230VAC 50HZ    >0.97@277VAC 60HZ
No load power (Max)<2W
Standby power (Max)<0.5W
THD(Typ.) @ full load<5.5%@120VAC    <9.5%@230VAC    <10.5%@277VAC
Efficiency @ full load>89.8%@120VAC 60Hz
>91.7%@230VAC 50HZ
>91.3%@277VAC 60HZ
AC Current (Max.)<1.28A
Inrush Current (Typ.)23.2A,398us @50%Ipeak 120VAC
48.8A,171us @50%Ipeak 230VAC
58.7A,404us @50%Ipeak 277VAC
Leakage current<0.5mA
ProtectionShort CircuitHiccup mode, recovers automatically after fault condition is removed
Over voltageHiccup or constant power mode, reboots automatically after fault condition is removed
Over temperatureAmbient temp. over 50± 5℃, output current will be reduced to 50%;
The ambient temperature drops to 40℃ ±5℃and automatically recovers.
Ambient temp.over 60± 5℃, output current will be reduced to 0%;
The ambient temperature drops to 40℃ ±5℃and automatically recovers.

EnvironmentWorking TEMP-40~+45℃ (see below derating curve)  
Working Humidity20 -90%RH  non-condensing  
Storage TEM.,Humidity-40 - +80℃,10 - 95% RH 
TEMP.coefficient±0.03%/℃(0 - 50℃)
Vibration10~500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y,Z axes
Safety & EMCSafety standardsEN61347-1   EN61347-2-13(EU)  &  UL8750 (US)
Withstand voltageI/P-O/P:3.75KVAC
Strobe test standardIEEE 1789 Flicker free
Surge Immunity TestAC Power Line:Differential Mode 2KV,
Isolation resistanceI/P-O/P:100MΩ / 500VDC / 25℃ / 70%RH
EMC EmissionEN55015   EN61000-3-2,3(EU)  &  FCC Part15 Subpart B; ANSI C63.4:2014(US)
OthersNet Weight430g
Dimension375.8*34.8*24.1mm (L*W*H)
Packing390*270*195  50pcs /CTN
Notes1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.
2. To extend the driver's using life, please reduce the loading at lower input voltage .
3. LED driver Meets the harmonic emissions requirements of ANSI C82.77-10.
4. Dimming electrical circuit:
Notice: This control circuit is isolated,but didn't evaluate Class 2.
Please refer to the installation manual to connect the dimmer.
CAUTlON: More than one power supply present.
ATTENTION: presence de plusieurs alimentations électriques.