Up to 86.5%
DMX signal-end isolation,Driver parameters can be adjusted by NFC APP.
Suitable for the application of LED lighting
Constant Current
Cooling by free air convection
Open circuit/short circuit/over temperature/over load
Built-in active PFC function
High efficiency, small size, high power factor, low THD
DMX dimming, RDM dimming, flicker free
IP20(EU); for dry and damp locations(US)
| Model | SMT-DI060W160-DMXP-T | |
| Certificate | UL/FCC/CE /ClassP/Class2/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCA | |
| Output | Rated current | 160mA-1600mA |
| DC Voltage | 12V-54V | |
| No-load voltage | 60Vmax | |
| Voltage Tolerance | Output current ± 10mA for ≤ 300mA, ± 20mA for ≥ 300mA, and ± 30mA for ≥ 1000mA | |
| Rated power | 60Wmax | |
| Line Regulation | <0.5% | |
| Load Regulation | <0.5% | |
| Input | Voltage Range | 100-277VAC |
| Frequency Range | 50/60Hz | |
| Power Factor (Typ.) | PF≥0.94 | |
| No load power (Max) | <1.5W | |
| Standby power (Max) | <0.5W | |
| THD(Typ.) @ full load | ≤15% | |
| Efficiency @ full load | ≥88%@120VAC 60Hz ≥89%@230VAC 50HZ ≥89%@277VAC 60HZ | |
| AC Current (Max.) | 0.75A | |
| Inrush Current (Typ.) | 28.7A, 204us@50%Ipeak@120V 55.2A, 98us@50%Ipeak@230V | |
| 66.0A, 220us@50%Ipeak@2770V | ||
| Leakage current | <0.5mA | |
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed |
| Over voltage | Hiccup or constant power mode, reboots automatically after fault condition is removed | |
| Over temperature | Ambient temp. over 55 ± 5℃, output current will be reduced to 50%; | |
| Ambient temp.Over 45 ± 5℃,recovers automatically. | ||
| Ambient temp.over 75 ± 5℃, output current will be reduced to 0%; | ||
| Ambient temp.Over 45 ± 5℃,recovers automatically. | ||
| Environment | Working TEMP | -40~+60℃ (see below derating curve) |
| Working Humidity | 20 -90%RH non-condensing | |
| Storage TEM.,Humidity | -40 - +80℃,10 - 95% RH | |
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | |
| Vibration | 10~500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y,Z axes | |
| Safety & EMC | Safety standards | EN61347-1 EN61347-2-13(EU) & UL8750 (US) |
| Withstand voltage | I/P-O/P:3.75KVAC (EU) & I/P-O/P:1.8KVAC (US) | |
| Strobe test standard | IEEE 1789 Flicker free | |
| lightning surge | DM:2KV | |
| Isolation resistance | I/P-O/P:100MΩ / 500VDC / 25℃ / 70%RH | |
| EMC Emission | EN55015 EN61000-3-2,3(EU) & FCC Part15 Subpart B; ANSI C63.4:2014(US) | |
| Others | Net Weight | 0.38KG |
| Dimension | 314*30*21.7mm (L*W*H) | |
| Packing | 355*270*195mm 20pcs /CTN | |
| Notes | 1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature. | |
| 2. To extend the driver's using life, please reduce the loading at lower input voltage . | ||
| 3. LED driver Meets the harmonic emissions requirements of ANSI C82.77-10. | ||
| 4. Dimming electrical circuit: | ||
| Notice: This control circuit is isolated,but didn't evaluate Class 2. | ||
| Please refer to the installation manual to connect the dimmer. | ||
| CAUTlON: More than one power supply present. | ||
| ATTENTION: presence de plusieurs alimentations électriques. | ||