ultra-thin constant current 60w 1200mA led power supply ip20 0-10v dimmable led driver for LED Strip | Lights | Lighting Accessories & Parts
ultra-thin constant current 60w 1200mA led power supply ip20 0-10v dimmable led driver for LED Strip
Mainland China
Booth: 5B-B15 | LED Lighting |
Product Specification
Protections

hort circuit/ Over load/ Over temperature/Over voltage

Dimming range

0.3%-100%

PFC design

Built-in active PFC function

Design features

0-10V signal-end isolation,Driver parameters can be adjusted by NFC APP.

Efficiency

Up to 81%

Dimming function

0-10V dimming, 1-10V dimming, flicker free

Output

Constant Current

Waterproof performance

Full plastic protection housing, for dry & damp locations .

Heat dissipation

Cooling by free air convection

Product Description
ModelSMT-DI060W120-CDP-T
CertificateUL/FCC/CE /ClassP/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCA
OutputRated current120mA-1200mA 
DC Voltage24-93VDC
No-load voltage60Vmax
Rated power60Wmax
Voltage ToleranceOutput current ± 10mA for ≤ 300mA, ± 20mA for ≥ 300mA, and ± 30mA for ≥ 1000mA
Line Regulation<0.5%
Load Regulation<0.5%
InputVoltage Range100-277VAC
Frequency Range50/60Hz
Power Factor (Typ.) ≥0.98@120VAC 60Hz    ≥0.96@230VAC 50HZ    ≥0.92@277VAC 60HZ
No load power (Max)<1.5W
Standby power (Max)<0.5W
THD(Typ.) @ full load≤15%
Efficiency @ full load88%@120VAC 60Hz    89%@230VAC 50HZ     89%@277VAC 60HZ
AC Current (Max.)0.65A
Inrush Current (Typ.)28.7A, 204us@50%Ipeak@120V     55.2A, 98us@50%Ipeak@230V
66.0A, 220us@50%Ipeak@2770V
Leakage current<0.5mA
ProtectionShort CircuitHiccup mode, recovers automatically after fault condition is removed
Over voltageHiccup or constant power mode, reboots automatically after fault condition is removed
Over temperatureAmbient temp. over 50± 5℃, output current will be reduced to 50%;
Ambient temp.Over 40 ± 5℃,recovers automatically.
Ambient temp.over 60 ± 5℃, output current will be reduced to 0%;
Ambient temp.Over 40 ± 5℃,recovers automatically.
EnvironmentWorking TEMP-40~+45℃ (see below derating curve)  
Working Humidity20 -90%RH  non-condensing  
Storage TEM.,Humidity-40 - +80℃,10 - 95% RH 
TEMP.coefficient±0.03%/℃(0 - 50℃)
Vibration10~500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y,Z axes
Safety & EMCSafety standardsEN61347-1   EN61347-2-13(EU)  &  UL8750 (US)
Withstand voltageI/P-O/P:3.75KVAC
Strobe test standardIEEE 1789 Flicker free
Surge Immunity TestAC Power Line:Differential Mode 2KV,
Isolation resistanceI/P-O/P:100MΩ / 500VDC / 25℃ / 70%RH
EMC EmissionEN55015   EN61000-3-2,3(EU)  &  FCC Part15 Subpart B; ANSI C63.4:2014(US)
OthersNet Weight0.38KG
Dimension342*34.8*24.1mm (L*W*H)
Packing355*270*195mm   50pcs /CTN
Notes1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.
2. To extend the driver's using life, please reduce the loading at lower input voltage .
3. LED driver Meets the harmonic emissions requirements of ANSI C82.77-10.
4. Dimming electrical circuit:
Notice: This control circuit is isolated,but didn't evaluate Class 2.
Please refer to the installation manual to connect the dimmer.
CAUTlON: More than one power supply present.
ATTENTION: presence de plusieurs alimentations électriques.