DMX Dim Led Driver 100w 2100mA 100-277vac Plastic case Led Power Supply | Lights | Lighting Accessories & Parts
DMX Dim Led Driver 100w 2100mA 100-277vac Plastic case Led Power Supply
Mainland China
Booth: 5B-B15 | LED Lighting |
Product Specification
Others

High efficiency, small size, high power factor, low THD

Waterproof performance

IP20(EU); for dry and damp locations(US)

Dimming function

DMX dimming, RDM dimming, flicker free

PFC design

Built-in active PFC function

Application

Suitable for the application of LED lighting

Efficiency

Up to 86.5%

Heat dissipation

Cooling by free air convection

Design features

DMX signal-end isolation,Driver parameters can be adjusted by NFC APP.

Protections

Open circuit/short circuit/over temperature/over load

Output

Constant Current

Product Description
ModelSMT-DI100W210-DMXP
CertificateUL/FCC/CE /ClassP/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCA
OutputRated current210mA-2100mA
DC Voltage12V-54V
Rated power 100Wmax
Voltage Tolerance±30mA
No-load voltage(Max.)98Vmax
Line Regulation<0.1%
Load Regulation<0.1%
InputVoltage Range100-277VAC
Frequency Range47 - 63Hz
Power Factor @ full load≤0.95
THD(Typ.) @ full load<10%
Efficiency @ full load>88.5%@120VAC 60Hz     >90.5%@230VAC 50HZ      >90.5%@277VAC 60HZ
No load power (Max)<3W
Standby power (max.)<0.5W
AC Current (Max.)<1.33A
Inrush Current (Typ.)29.6A, 412us@50%Ipeak120V     56.8A, 120us@50%Ipeak230V
68.4A, 580us@50%Ipeak277V
Leakage current<0.5mA
ProtectionShort CircuitHiccup mode, restarts automatically after fault condition is removed
Over Load≤120% Hiccup mode or Constant power mode, recovers automatically after fault condition is removed
Over temperatureAmbient temp. over 55 ± 5℃, output current will be reduced to 50%;
Ambient temp.Over 45 ± 5℃, recovers automatically after temp. drops.
Ambient temp.over 75 ± 5℃, output current will be reduced to 0%;
Ambient temp.Over 45 ± 5℃, recovers automatically after temp. drops.
EnvironmentWorking TEMP-40~+60℃ (see below derating curve)  
Working Humidity20 -90%RH  non-condensing  
Storage TEM.,Humidity-40 - +80℃,10 - 95% RH 
TEMP.coefficient±0.03%/℃(0 - 50℃)
Vibration10~500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y,Z axes
Safety & EMCSafety standardsEN61347-1   EN61347-2-13 (EU)  &  UL8750  (US)
Withstand voltageI/P-O/P:3.75KVAC (EU)  &  I/P-O/P:1.8KVAC (US)
Isolation resistanceI/P-O/P:100MΩ / 500VDC / 25℃ / 70%RH
EMC EmissionEN55015  EN61000-3-2,3 (EU)  &  FCC Part 15, Subpart B;ANSI C63.4:2014 (US)
EMC ImmunityEN61000-4-2,3,4,5,6,11  EN61547 (EU)
Lightning surgeDM:2KV  CM:4KV
Strobe test standardIEEE 1789 flicker-free
OthersNet Weight0.43KG
Dimension375.8*34.8*24.1mm (L*W*H)
Packing32*24.5*355  50pcs /CTN
Notes1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.
2. To extend the driver's using life, please reduce the loading at lower input voltage .
3. LED driver Meets the harmonic emissions requirements of ANSI C82.77-10.
4. Dimming electrical circuit:
Notice: This control circuit is isolated,but didn't evaluate Class 2.
Please refer to the installation manual to connect the dimmer.
CAUTlON: More than one power supply present.
ATTENTION: presence de plusieurs alimentations électriques.