Triac Dimmable Constant Voltage 24V LED driver 96W PWM output & VR output Switchable | Lights | Lighting Accessories & Parts
Triac Dimmable Constant Voltage 24V LED driver 96W PWM output & VR output Switchable
Mainland China
Booth: 5C-F23 | LED Lighting |
Product Specification
Model No.

SMT-24096-VT-P

Brand

SMARTS

Dimming Range

0-100% Dimming depth 0.1%

Range

100-277VAC

Working Mode

Constant Voltage

Protections

Short circuit/ over load/ over temperature

Warranty

7 Years Warranty

Dimming Function

Phase dimming: work with forward phase /leading edge, MLV and Reverse phase /trailing edge, ELV, TRIAC dimmers

Product Description
ModelSMT-24096-VT-PSMT-48096-VT-P
CertificateUL / cUL / FCC / Class P / Class 2/Type HL/ICES-005
OutputDC Voltage24V48V
Voltage Tolerance±2%±2%
Voltage Regulation≤0.5%≤0.5%
Load Regulation≤0.5%≤0.5%
Rated current≤2%≤2%
Rated power96W
Voltage Ripple296mv176mv
Overshoot voltage<3%(full load)<3%(full load)
Output mode selectionWhen the blue&white wire and the yellow&gray wire at the output terminal are short-circuited, it indicates the Pulse-Width Modulation (PWM) mode. When they are disconnected, it indicates the Voltage Regulation (VR) mode of direct current voltage modulation.
Switching the output mode requires the power to be cut off for 3 seconds and then powered on again for the mode switching to take effect.
InputVoltage Range100-277VAC
Frequency Range47 - 63Hz
Power Factor (Typ.) @ full load>0.98@120VAC
>0.97@277VAC
>0.98@120VAC
>0.97@277VAC
THD(Typ. ) @ full load<15%@120V  <15%@277V
Efficiency(Typ.) @ full load≥88%@120VAC   
≥91.5%@277VAC
≥87%@120VAC  
≥90.5%@277VAC 
AC Current (Max.)≤1.0A @120VAC  ≤0.43A@277VAC
Standby power≤0.5W
Inrush Current (Typ.)51A,208us@50%Ipeak 120VAC     118A,452us@50%Ipeak 277VAC
Leakage current<0.5mA
ProtectionShort CircuitHiccup mode, can be automatically restored after abnormal removal
Over Load≥120%,Constant - Current Mode, automatic recovery after exception
Over temperatureWhen the ambient temperature exceeds 55℃ ±5℃, the output is turned off
EnvironmentWorking TEMP.-40~+40℃ (see below derating curve)
Working Humidity20 - 95%RH  non-condensing
Storage TEM.,Humidity-40 - +80℃,10 - 95% RH non-condensing
TEMP.coefficient±0.03%/℃(0 - 50℃)
Vibration10 ~ 500Hz, 5G 12 minutes/cycle, X Y Z axis 72 minutes each
Safety & EMCSafety standardsUL8750  CAN/CSA-C22.2 No.250.13
Withstand voltageI/P-O/P:1.88KVac;I/P-FG::1.88KVac;O/P-FG:0.5KVac
Isolation resistanceI/P-O/P:100MΩ / 500VDC / 25℃ / 70% RH
Surge Immunity TestAC Power Line:Differential Mode 2KV,Common Mode 4KV
EMC ImmunityFCC/ICES do not request this test
EMC EmissionFCC Part15 Subpart B;ANSI C63.4:2017;ICES-005 Issue 5
OthersNet Weight0.56KG
Dimension188*61.4*25.5mm(L*W*H)
Packing415*230*170mm    20 pcs / CTN
Notes1. All parameters NOT specially mentioned are measured at 120VAC input, rated load and 25℃of ambient temperature.
2. Tolerance: includes set up tolerance and load regulation .
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.
4. Default states:The output mode is VR output by default.    The dimming curve is a gamma2.2 curve.
5. Regarding LED driver load types where the driver meets the harmonic emissions requirements of ANSI C82.77-10.