Suitable for the application of LED lighting
Full plastic protection housing, for dry & damp locations .
0-10V signal-end isolation,Driver parameters can be adjusted by NFC APP.
Up to 81%
Cooling by free air convection
0.3%-100%
Built-in active PFC function
Short circuit/ Over load/ Over temperature/Over voltage
0-10V dimming, 1-10V dimming, flicker free
Constant Current
| Model | SMT-DI100W210-CDP-T | |
| Certificate | UL/FCC/CE /ClassP/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCA | |
| Output | Rated current | 210mA-2100mA |
| DC Voltage | 12-54VDC | |
| Rated power | 100Wmax | |
| Current Tolerance | Output current ± 30mA | |
| Line Regulation | <0.1% | |
| Load Regulation | <0.1% | |
| Input | Voltage Range | 100-277VAC |
| Frequency Range | 50/60Hz | |
| Power Factor (Typ.) | >0.99@120VAC 60Hz >0.98@230VAC 50HZ >0.97@277VAC 60HZ | |
| No load power (Max) | <2W | |
| Standby power (Max) | <0.5W | |
| THD(Typ.) @ full load | <5.5%@120VAC <9.5%@230VAC <10.5%@277VAC | |
| Efficiency @ full load | >88.8%@120VAC 60Hz | |
| >90.7%@230VAC 50HZ | ||
| >90.7%@277VAC 60HZ | ||
| AC Current (Max.) | <1.28A | |
| Inrush Current (Typ.) | 24.8A,412us @50%Ipeak 120VAC | |
| 56.8A,120us @50%Ipeak 230VAC | ||
| 68.4A,580us @50%Ipeak 277VAC | ||
| Leakage current | <0.5mA | |
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed |
| Over voltage | Hiccup or constant power mode, reboots automatically after fault condition is removed | |
| Over temperature | Ambient temp. over 50± 5℃, output current will be reduced to 50%; | |
| The ambient temperature drops to 40℃ ±5℃and automatically recovers. | ||
| Ambient temp.over 60± 5℃, output current will be reduced to 0%; | ||
| The ambient temperature drops to 40℃ ±5℃and automatically recovers. | ||
| Environment | Working TEMP | -40~+45℃ (see below derating curve) |
| Working Humidity | 20 -90%RH non-condensing | |
| Storage TEM.,Humidity | -40 - +80℃,10 - 95% RH | |
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | |
| Vibration | 10~500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y,Z axes | |
| Safety & EMC | Safety standards | EN61347-1 EN61347-2-13(EU) & UL8750 (US) |
| Withstand voltage | I/P-O/P:3.75KVAC | |
| Strobe test standard | IEEE 1789 Flicker free | |
| Surge Immunity Test | AC Power Line:Differential Mode 2KV, | |
| Isolation resistance | I/P-O/P:100MΩ / 500VDC / 25℃ / 70%RH | |
| EMC Emission | EN55015 EN61000-3-2,3(EU) & FCC Part15 Subpart B; ANSI C63.4:2014(US) | |
| Others | Net Weight | 430g |
| Dimension | 375.8*34.8*24.1mm (L*W*H) | |
| Packing | 390*270*195 50pcs /CTN | |
| Notes | 1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature. | |
| 2. To extend the driver's using life, please reduce the loading at lower input voltage . | ||
| 3. LED driver Meets the harmonic emissions requirements of ANSI C82.77-10. | ||
| 4. Dimming electrical circuit: | ||
| Notice: This control circuit is isolated,but didn't evaluate Class 2. | ||
| Please refer to the installation manual to connect the dimmer. | ||
| CAUTlON: More than one power supply present. | ||
| ATTENTION: presence de plusieurs alimentations électriques. | ||