Ultra-thin ip20 plastic linear cabinet constant current 700mA 20w 0-10v dimmable led driver with pfc | Lights | Lighting Accessories & Parts
Ultra-thin ip20 plastic linear cabinet constant current 700mA 20w 0-10v dimmable led driver with pfc
Mainland China
Booth: 1B-A21 | Smart Lighting Products & Solutions |
Product Specification
Waterproof performance

Full plastic protection housing, for dry & damp locations .

Heat dissipation

Cooling by free air convection

Min load

0.3%-100%

Output

Constant Current

PFC design

Built-in active PFC function

Dimming function

0-10V dimming, 1-10V dimming, flicker free

Efficiency

Up to 81%

Range

100-277VAC

Design features

0-10V signal-end isolation,Driver parameters can be adjusted by NFC APP.

Protections

Short circuit/ Over load/ Over temperature/Over voltage

Product Description
ModelSMT-DI020W070-CDP-T
CertificateUL/FCC/CE /ClassP/Class2/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCA
OutputOn-load voltage range12-54V
Output Current Setting(loset)70-700mA
Range
Output Current Setting Range370-700mA
with Constant Power
Rated power20W(Max)
No Load Output Voltage60V(Max)
Current Tolerance700mA±5%
Total Output Current Ripple20mA(Imax)
Startup Overshoot Current9%(Max)
Line Regulation<0.5%
Load Regulation<0.5%
InputVoltage Range100-277VAC
Frequency Range50/60Hz
Standby Power≤0.5W
Power Factor (Typ.) @ full load0.99@120VAC    0.97@230VAC    0.93@277VAC
THD(Typ. ) @ full load<10%@100-277VAC
Efficiency(Typ.) @ full load82%@120VAC   82%@230VAC   82%@277VAC
AC Current (Max.)<0.3A@120VAC   <0.22A@230VAC   <0.15A@277VAC
Standby power≤0.5W
Inrush Current (Typ.)17.5A, 50%, 29.1us @120VAC;   33.6A, 50% 864us @277VAC   40.4A, 50% 26us @277VAC
Leakage current<0.5mA
ProtectionShort CircuitConstant current mode, recovers automatically after fault condition is removed
Over Load≥110% Constant current mode,recovers automatically after fault condition is removed
Over temperatureAmbient temperature over 50℃±5℃ to reduce output to 50%;
The ambient temperature drops to 40℃ ±5℃and automatically recovers.
Ambient temperature over 60℃±5℃ to reduce output to 0%;
The ambient temperature drops to 40℃ ±5℃and automatically recovers.
EnvironmentWorking TEMP.-40~+45℃ (see below derating curve)
Working Humidity20 - 95%RH  non-condensing
Storage TEM.,Humidity-40 - +80℃,10 - 95% RH non-condensing
TEMP.coefficient±0.03%/℃(0 - 50℃)
Vibration10~500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y,Z axes
Safety & EMCSafety standardsUL8750;EN61347-1
Withstand voltageI/P-O/P:1.88KVAC(MAX 3.75KVAC)
Isolation resistanceI/P-O/P: 100MΩ/ 500VDC/ 25℃/ 70% RH
EMC ImmunityIEC/EN61000-4-2,3,4,5,6,8,11; EN/EN61547
EMC EmissionEN55015 EN61000-3-2,3 FCC Part15 Subpart B;ANSI C63.4:2014
Surge Immunity TestAC Power Line:Differential Mode 2 kV,
OthersNet Weight215g
Dimension251.9*31*22.5mm(L*W*H)
Packing290*225*215mm    50pcs /CTN
Notes1. All parameters NOT specially mentioned are measured at 120VAC input, rated load and 25℃of ambient temperature.
2. Default states:
Output Current Setting is Maximum value.
The dimming curve is a logarithmic curve.
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation agai
4. To extend the driver's using life , please reduce the loading at lower input voltage .
5. Dimming electrical circuit:
Notice: This control circuit is isolated,but didn't evaluate Class 2.
Please refer to the installation manual to connect the dimmer.
CAUTlON: More than one power supply present.
ATTENTION: presence de plusieurs alimentations électriques.