Product Description

1) Type: Cable, S/FTP CAT8 Patent RJ45 male to male

2) Connector 1: RJ45 male newly researched

3) Connector 2: RJ45 male newly researched

4) Wire: CAT8 S/FTP 7/0.127BC

5) Length: 5m

6) Color: Orange.... 

7) 40G 2000MHz

8) Imprint: Imprint is available

9) OEM welcome

Product Features

【Fast speed & SFTP】CAT 8 cable is made of quadruple shielded(S/FTP) of copper wires which support bandwidth up to 2000MHZ and 40Gbps data transmitting speed

【Wide Compatible】Meet all proposed CAT 8 cable requirements and compatible with older Cat 7;CAT6;CAT6e;CAT5 and CAT5e cable standards; Perfect for Network Adapters, Hubs, Routers, DSL / Cable Modems, PS3, PS4, X-box, patch panels and other high performance networking applications

【Heavy duty & Direct Burial】 The quadruple shielded Cat8 Ethernet cable is super efficient in reducing EMI/RFI Interference and provide highest fidelity for long distance data transmission; With upgraded PVC, Cat8 is waterproofed & anti-corrosion and more durable & flexible for heavy duty work;Both outdoor and indoor conditions are permitted to install, also direct burial

Six major characteristics

1 Use occasions

★Cat.8 Assembly type industrial interconnect Modular plug， Suitable for the connection and

signal control of robot towing chain, High-end machine room, Hd monitoring, High-speed rail

Subway, Internet, Artificial intelligence (AI),5G and other equipment.

2 Super tensile strength

★After the boot is installed into the sticking point of the modular plug， then do Tensile test， The

boot part can hold a tension of 20KG(196N) for 1 minute without any abnormal appearance,

The total wires can withstand the tension of more than 20KG(196N) after the contact puncture

the wires, Transient section of electrical signal＜5μs.

3 Standard Test

★The product is assembled into a patch cord with the matching CAT8 network cable, then

tested by Fluke Network tester test, can fully meet the requirement of CAT8 Link test standard.

4 Products matching

★This type of Modular plug can be installed into the network cable which OD is 5.5-9.0mm,

and also suitable for the inner wire ID:1.1-1.5mm.

5 Firm structure

★The plug and booth are assembled with double sides and 4 sticking points,

Tightly coupled， The overall structure is very solid and stable, 2 sets of stop points are designed

for upper and lower of the shielding shell of modular plug, To match with modular plug, the

front of boot is designed to adding 4 square hole steps for installation and fixation.

6 Excellent selection of material

★Contact， Using phosphor copper C5191-R， Small conductive resistance and good strength,

contact surface gold plated 50U”， Low contact resistance and good transmission performance.

★Shielding shell of plug： Using brass, which thickness is0.40mm, Enhanced the overall structural

strength of modular plug, can greatly reduce the interference of signal transmission.

★PC Housing、 Boot material， Both PC， Fire rating up to UL 94V-0.